ShockGuard
ShockGuard
The Pipeline Shock Prevention People
Pump Start-up surge, Valve closure shock, Pump shutdown back flow bang.
Large vessels for high pressures with matching bladders, diaphragms, gas bags, and bellows, for over a third of a century.
ShockGuard Ltd. offer shock alleviators. | Please phone USA 910-270-2737
We have people not voicemail. | Call toll free 1-888-DAMPERS

 Fluid Flow Control Animations by Liquid Dynamics

CONTACT SHOCKGUARD
VALVE CLOSURE SHOCK
WAVE RESONANCE & THERMAL COMPENSATION
PUMP START-UP SURGE

Resonant pump shaft deflection PULSATION with a
WAVEGUARD waveguard cutsheet cross-sectional symbol
NO MOVING PARTS DAMPERS - SELECTED TO REDUCE THE PRESSURE WAVE AMPLITUDE TRANSMITTED BACK FROM A PIPE TO A PUMP BY 90% AT 20 HZ AND ABOVE
May be code stamped at your option CERT #29, 289
 Prevents the interation between pumps and bad systems from building and "resonating".
In place flushing when installed in a vertical run.
A=Cross Sectional area for this diameter
sketch acoustic ceramic balls WaG
Cross Sectional Area 0.15 A
understanding the fundamentals of Shockguard Ltd. Explanations - Understanding Frequencies / How shock and surge prevention works

Ldi analytical and modeling services and software Visit LIQUID DYNAMICS Intl. Ltd. LDi offers analytical and modeling services. They predict these and similar problems, before pipe systems are built. When you pipes already exist, it is less expensive to install a WAVEGUARD than to stand the cost of acoustic diagnostics, analysis and modeling.

 

ShockGuard Shock / Surge Alleviators and Accumulators
Water Hammer and Pipeline Shock / Surge Prevention Equipment
STOP Pump start up surge, Valve closure shock, and Shut down back flow water hammer.
Call Toll Free 1-888-326-7377, UK Europe -- 44(0)161-480-9625, or Contact Us Online.

Understanding How it Works
Shock alleviators and shock accumulators do not alleviate shock, nor do surge alleviators and surge accumulators alleviate surge. SurgeGuard, JumboFlex, and Floatolator all work in the same way. They provide a soft place, so that the pump does not have to instantly accelerate all the liquid in the pipe system when it starts. Similarly, they provide a place into which flow can continue, for a time, against increasing resistance, when a a valve has been slammed. In both cases, because time has been increased, peak pressure generation is decreased. In short, they all prevent the peak pressure from being generated.

www.Shock-Guard.com / www.ShockGuard.co.uk

Other Important Sites to Help You