ShockGuard

ShockGuard
The Pipeline Shock Prevention People
Pump Start-up surge, Valve closure shock, Pump shutdown back flow bang.
Large vessels for high pressures with matching bladders, diaphragms,
gas bags, and bellows, for over a third of a century.



Fluid Flow Control Animations
Fluid Flow Control Animations
For Terms, technical services, & other Surge, Hammer and Shock guarding details, call Toll Free 888-326-7377 or fax toll free 888-825-5357

 

JumboGuard Transfer Barrier for Between Two Fluids

Typical "Jug" Series "Transfer Barrier" between 2 fluids. 316L wetted, carbon steel housing + EP, NBR, Hypalon, Fluorel Transfer Barrier Bag.

JumboGuard for Transfer Barrier noinse caused by rapid valve closure www.water-hammer.com for pump start-up surge, Surge-alleviators.com line shock alleviators Shock-alleviators.co.uk suppressore & arrestors www.ShockGuard.us Druckschlagverhinderer - www.schockabsorber.com Waermeausdehnung-Kompensator waermeausdehnung.com http://www.shock-guard.com http://www.shockguard.co.uk Typical "Jug" Series "Transfer Barrier" between 2 fluids. 316L wetted, carbon steel housing + EP, NBR, Hypalon, Fluorel Transfer Barrier Bag. Enables a "nasty fluid" to be pumped by an easily pumpable fluid.

DRAWINGS for SHOCK and SURGE ALLEVIATOR ATTENUATOR ARRESTORS & Transfer Barriers
FloatOlator for Applications too Large for molded membranes
Liquibello for Temps above Elastomer Capablility
FlexOrber for PTFE compatibility
JumboFlex for Non Corrosive Liquids
JumboGuard for Transfer Barrier
SurgeGuard for Corrosive Liquids
Diaphragm Seals / Pressure Instrument Isolator


Diaphragm seals enable the use of standard low cost measurement and control instruments.
A transfer barrier enables the pumping of one fluid to produce pressure in another liquid without the mixing of the two.


JumboFlex - Flat Head for Medium Pressure
JumboFLex -Dome Head for High Pressure
Flat head for medium pressure JumboFlex, alleviator from Shockguard
Dome Head for high pressure Jumboflex - shock alleviator from Shockguard


ORDERING - PART NUMBER
DIMS.
Type
Vol.Gals.
Design PSI
Material
Connection
Opening
Lgth
Diam
Wght
   
at 100 Degrees F wetted
 
type
Ft. L
Ins. D
Lbs.
SuG
26 G
275p
SA240Gr316
3" 150#
Full
7.0
10.5
576
SuG
40 G
275p
SA240Gr316
4" 150#
Full
7.0
12.5
700
SuG
65 G
275p
SA240Gr316
5" 150#
Full
9.25
14.0
1165
SuG
130 G
275p
SA240Gr316
6" 150#
Full
11.75
18.0
1930
                 
SuG
200 G
275p
SA240Gr316
6" 150#
Full
14.5
20.0
2912
SuG
250 G
275p
SA240Gr316
8" 150#
Full
15.0
22.0
3450
SuG
400 G
275p
SA240Gr316
10" 150#
Full
15.5
26.0
4340
SuG
525 G
275p
SA240Gr316
12" 150#
Full
16.5
30.0
6600
                 
JoF
25 G
550p
SA516Gr60
3" 300#
Flat Hd.
5.5
12.5
1150
JoF
40 G
550p
SA516Gr60
4" 300#
Flat Hd.
7.0
14
1400
JoF
40 G
550p
SA516Gr60
4" 300#
6"Neck
3.5
20
1600
JoF
65 G
550p
SA516Gr60
5" 300#
Flat Hd.
7.0
18
2800
JoF
130 G
550p
SA516Gr60
6" 300#
Flat Hd.
10.8
20
4500
                 
JoF
200 G
550p
SA516Gr60
6" 300#
Flat Hd.
14.0
22
6500
JoF
250 G
550p
SA516Gr60
8" 300#
Flat Hd.
102.3
26
7340
JoF
400 G
550p
SA516Gr60
10" 300#
Flat Hd.
14.0
30
9000
JoF
525 G
550p
SA516Gr60
12" 300#
Flat Hd.
15.0
36
11000
JoF
1050 G
550p
SA516Gr60
18" 300#
2:1SE Cvr
15.0
48
23000

To the price for #300 series above, for JoF/HP Dome Head (as shown below), #600 series please estimate an additional 35%, #900 series add 58%, #1500 please call.

For Terms, technical services, & other SURGE, HAMMER and SHOCK guarding details, please call
Toll Free 1-888-326-7377 or fax us toll free on 1-888-825-5357



  Hardware for United States  |  ShockGuard.co.uk Applications  

By allowing the flow velocity to be reduced progressively when valves are slammed closed, accumulators prevent water hammer in pipes, and when pumps start fast they are stopped from making high and low pressure surges; both applications increase safety.

Taking the spikes and transient peaks out of your pipeline systems. Stop pipe fatigue fracture and prevent toxic spills from flange gasket extrusion. Ensuring safety by guaranteeing system integrity. Stop the hose jumping out of the tank when the meter stop valve closes at filling stations. Stop the shocks in your fire prevention system, there is no need to burst the pipes and flood the entire building as well. You do not have to get sued for "white finger" by the guys who use the cleaning lances. Stop the shocks in your cleaning and water dousing depertments.


ShockGuard

Technical Support, (Not costs or days)


Phone:
910-270-2737
Fax: 910-270-2740
Email: Fluid.Flow.Tech@Gmail.com